USB C Solder Socket 5-22 Pin for Mobile Phone Charging Port Repair

Product Description

Product Overview

This USB C Solder Socket is a high-quality replacement charging port connector for mobile phone and electronics repair. Designed for surface mount soldering, it allows technicians to restore charging and data sync functionality on damaged PCBs. Compatible with universal Type C devices, this socket comes in multiple pin configurations (5-22 pins) to suit different repair requirements. The copper alloy contacts with gold flash plating ensure excellent conductivity, while the high-temperature plastic housing provides durability for repeated plugging cycles. Available pin counts include 5, 6, 12, 14, 16, 22, and 24-pin variants.

The USB Type C interface supports reversible plug orientation, allowing users to insert the cable in either direction without worrying about polarity. This connector fully complies with the Universal Serial Bus specification and works with most Android smartphones, power banks, tablets, and other USB C devices.

16-pin configuration retains 1 pair of high-speed differential pairs (TX/RX), supporting USB 3.2 Gen1 (5Gbps) data transfer and PD fast charging up to 60W, making it suitable for smartphones, tablets, and general consumer electronics. 24-pin full-featured variant includes 2 complete pairs of high-speed differential pairs, supporting USB 3.2 Gen2 (10Gbps), USB4 / Thunderbolt (40Gbps), DP Alt Mode video output, and PD up to 240W, ideal for laptops, high-end docking stations, and high-speed SSDs.

Each unit is 100 percent pre-shipment continuity tested to ensure reliable connectivity. This product is ideal for phone repair shops, electronics technicians, and DIY enthusiasts.

Technical Specifications Table 1 - Core Parameters

 

 

Parameter	Specification
Product Type	USB C Solder Socket
Connector Type	USB Type C Female
Pin Options	5, 6, 12, 14, 16, 22, 24
Mounting Type	SMD (Surface Mount) / Through-Hole
Current Rating	3A (16-pin) / 5A (24-pin)
Voltage Rating	20V max
Data Rate (16-pin)	USB 3.2 Gen1 (5Gbps)
Data Rate (24-pin)	USB 3.2 Gen2 (10Gbps) / USB4 (40Gbps)
Contact Resistance	< 40 mΩ
Insulation Resistance	> 100 MΩ
Contact Plating	Gold Flash over Nickel
Shell Material	Stainless Steel, Nickel Plated
Durability	10,000 cycles
Operating Temp	-25°C to +85°C
Testing	100% pre-shipment (continuity, pin alignment)
Packaging	Anti-static ESD safe bag
Warranty	12 months
HS Code	8536690000

Technical Specifications Table 2 - Pin Count vs. Functionality

 

 

Pin Count	Data Rate	PD Charging	Video Output	Typical Applications
6	USB 2.0 (480 Mbps)	≤15W	No	Smart bracelets, small fans, low-cost IoT
16	USB 3.2 Gen1 (5Gbps)	≤60W	No	Smartphones, tablets, power banks
24	USB 3.2 Gen2 (10Gbps)	≤240W	Yes	Laptops, monitors, high-speed SSDs

Detailed Product Features

Multiple Pin Count Options - Available in 5, 6, 12, 14, 16, 22, and 24-pin configurations to match different PCB designs and functional requirements.

OEM Grade Quality - Manufactured with high-temperature resistant plastic housing and copper alloy contacts for excellent conductivity. Gold flash plating over nickel ensures superior corrosion resistance and durability.

USB 3.2 Data Transfer Support - 16-pin variant supports 5Gbps data transfer; 24-pin variant supports up to 10Gbps (USB 3.2 Gen2) or even 40Gbps (USB4). D+ and D- pins provide USB 2.0 compatibility (480 Mbps) across all configurations.

PD Fast Charging Capability - CC1 and CC2 pins support Power Delivery protocol handshaking for device power negotiation. Supports 3A (60W) on 16-pin and up to 5A (100W/240W) on 24-pin models.

Reversible Plug Design - The USB Type C interface supports plug insertion in either orientation, eliminating the need to check cable direction before connecting.

High Durability and Reliability - Rated for 10,000 insertion and removal cycles. The stainless steel nickel-plated shell provides robust mechanical strength. Operating temperature range of -25°C to +85°C ensures stable performance under various environmental conditions.

Easy Soldering Design - Designed with surface-mount pads for simple hand soldering, suitable for both professional technicians and DIY enthusiasts.

100 Percent Pre-Shipment Testing - Each connector is tested for continuity, pin alignment, and mechanical fit before packing.

Common Failure Symptoms and Replacement Indicators

 

 

Symptom	Cause	Action
Phone does not charge	Broken solder joints or damaged port	Replace socket
Intermittent charging when cable moved	Loose connection or cracked solder	Replace and re-solder
Data transfer fails but charging works	Damaged D+ or D- pins	Replace socket
Loose USB cable connection	Worn retention mechanism	Replace socket
Physical damage to port	Bent pins or broken plastic	Replace socket

Installation Guidelines for Repair Technicians

Before installation:

1. Power off the device and disconnect the battery.

2. Remove the old USB C socket using a hot air rework station (320-350°C) or soldering iron with desoldering braid.

3. Clean the PCB pads with isopropyl alcohol and desoldering wick.

4. Inspect pads for damage or missing traces.

Installation (SMD):

1. Apply fresh solder paste or flux to the cleaned pads.

2. Align the new socket with the PCB footprint (ensure correct orientation - the pin row should match the pad layout).

3. Reflow using hot air until the socket settles into place.

4. Use a fine tip soldering iron to touch up any bridges on the pins.

5. For through-hole versions, insert pins into PCB holes and solder on the opposite side.

6. Clean flux residue with isopropyl alcohol.

7. Test continuity between the socket pins and corresponding PCB traces before reassembling the device.

Important Warning: This is a delicate surface-mount component. Professional micro-soldering experience is required. Improper installation may damage the PCB pads or cause short circuits. Always disconnect the battery before soldering. The seller is not responsible for any installation damage.

Market Relevance for Africa, South America, and Europe

Africa: USB C has become the standard charging port for most new Android smartphones across Nigeria, Kenya, South Africa, Ghana, and Tanzania. Charging port failure is common due to daily wear, dust, and use of low-quality cables. Distributors offering high-quality USB C sockets serve consistent demand from local repair shops.

South America: In Brazil, Argentina, Colombia, and Chile, the repair market for smartphones remains robust. USB C devices are prevalent across all price segments. High import taxes make device replacement costly, so component-level repairs are economical. Local repair technicians need reliable charging port sockets.

Europe: Millions of USB C devices are in circulation, with many consumers holding onto devices for longer periods. The Right to Repair movement encourages component-level repairs, reducing electronic waste. European buyers prioritize quality, consistency, and RoHS compliance.

Trust Enhancement - Why Choose MobiRabbit

MobiRabbit (Guangzhou Biaofeng Electronic Technology Co., Ltd.) has supplied mobile phone parts for over 25 years. We are a fully licensed company registered in Guangzhou, China, with a Hong Kong branch (Mobi Rabbit Limited). Our business license is verifiable through the National Enterprise Credit Information Publicity System.

We maintain stable inventory of USB C sockets in multiple pin configurations. Each unit is 100 percent continuity tested and dimensionally inspected before packing. We use high-quality materials from certified suppliers.

Payment Methods

For regular wholesale orders, we accept: Bank Transfer (T/T), Western Union, MoneyGram, Alipay, WeChat Pay, and USDT (cryptocurrency).
For first-time buyers or small sample orders (typically up to 50 pieces), we welcome platform online payment methods (such as Made-in-China online order, credit card) to build trust and simplify the first transaction.
Accepted currencies: USD, EUR, GBP, CAD, CNY, NGN (Nigerian Naira).
No PayPal for regular orders, but platform online payment is available for samples.

Company Background Summary

• Brand: MobiRabbit

• Manufacturer: Guangzhou Biaofeng Electronic Technology Co., Ltd. (25+ years)

• Hong Kong Branch: Mobi Rabbit Limited

• Payment Methods: T/T, Western Union, MoneyGram, Alipay, WeChat Pay, USDT (bulk); platform online payment (samples)

• Accepted Currencies: USD, EUR, GBP, CAD, CNY, NGN

• Shipping Partners: DHL, UPS, FedEx, TNT, EMS, Hongkong Post, local forwarders

• Warranty: 12 months

Final Note to Buyers

We invite you to place a small sample order via platform online payment to test our quality. Contact us for a proforma invoice and wholesale pricing.